Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY PREPARATION
• Begin the assembly of this cabinet on a clean, level surface.
• Remove all items from the box and ensure that all parts listed on page 3 are
present.
• When installing parts that have more than one screw, tighten all screws by
hand before finishing tightening them with the provided screwdriver (24).
ASSEMBLY INSTRUCTIONS
STEP 1
Open the package, remove and place
all parts to the side. Then open the
interior packaging containing the solid
wood board (10).
Note:
The solid wood board is packed within
an inner cardboard box.
STEP 2
Attach the magnets (17) to the front
frame (2)—one onto the top inside of
the front frame near to the elliptical
hole, and another one on the bottom of
the front frame (2) which is also near
an elliptical hole—using the screw-
driver (24) with four M4x10 screws A
(20) to secure.
Then, attach the front frame (2) onto
the solid wood board (10). Line up
screw holes and use the screwdriver
(24) with two M4x10 screws A (20) to
secure.
Front
Back
4
Publicité
