MAXXMEE QJ-J Mode D'emploi page 15

Body analysis scales
7. The values determined are displayed
in the following order under Dynamic:
○ Weight
○ BMI (Body Mass Index)
○ Body fat content in %
○ Muscle mass in kg
○ Water content in %
○ Visceral fat
○ Bone mass in kg
○ Basal metabolic rate in kcal
8. Alongside the measured or calculat-
ed value, it is displayed whether the
values are in the standard range or
are too high or too low (measured
against average values).
9. Select one of the values to display
details about the values.
 
Under Dynamic > History values
for previous measurements are
saved and can be viewed.
Managing User Profi les
It is possible to create several different
user profi les. These can be created and
managed under Me.
Further user profi les
1. Select either the profi le picture at the
top left or Me at the bottom right in
the menu bar.
2. Select Add. The Profi le creation mask
opens up.
3. Set up the new profi le (name, gender,
date of birth, height) and confi rm the
details entered with Next.
4. Set the target weight by swiping to
the left or right and confi rm by press-
ing OK. This completes the process
of setting up the user profi le.
Please Note: The user profi le created
most recently automatically becomes
the active user profi le! The active
user profi le can be changed via se-
lection of the profi le picture (not the
profi le name!) at the top left where
the profi le you want should be select-
ed from the list.
Managing User Profi les
Under Me the personal details of the
user profi les and your own profi le can be
modifi ed at any time. User profi les can
also be deleted in this way. Please Note:
Your own account can only be deleted
under Me > Settings > Account Set-
tings (Android) or Account (iOS) (see the
"Other Functions" section).
 
The active user profi le can also
be edited by selecting the profi le
name (not the profi le picture!) at
the top left under Dynamic. This
menu also provides access to a
guest account which can be used
to perform a one-off measure-
ment including analysis without
needing to create a user profi le.
Managing Paired Devices
Under the Device menu item, the de-
vices that are paired to the app can be
viewed and managed. This menu item
can be used to connect further devices
or disconnect paired devices:
○ Connect: Select Add device and
follow the instructions.
○ Disconnect: Select the scales you
want from the list of connected
devices and tap on the Unbind (An-
droid) or Unpair (iOS) button.
Other Functions
Track progress
Your individual progress can be viewed
under Trend. To do this, select the dia-
gram symbol from the menu bar.
Share app
The values can be shared with family,
friends and acquaintances via various
platforms. To do this, select the left-hand
symbol in the top, right corner under
Dynamic.
EN
15