Symbols; Signal Words; Intended Use - MAXXMEE ZM-511B Mode D'emploi

EN
Dear Customer,
We are delighted that you have chosen the MAXXMEE double waffl e maker.
The control lamp tells you when the optimum baking temperature has been reached.
Spread the waffl e mixture on the baking surface, close the lid and just a few moments
later you will be able to enjoy aromatically fresh heart-shaped waffl es. You can use
the slide control to individually adjust the temperature and therefore also the level of
browning of your waffl es. If you have any questions about the device and about spare
parts /accessories, contact the customer service department via our website:
We hope you have a lot of fun with your MAXXMEE double waffl e maker.
Information About the Operating Instructions
Before using the device for the fi rst time, please read through these operating in-
structions carefully and keep them for future reference and other users. They form an
integral part of the device. The manufacturer and importer do not accept any liability
if the information in these operating instructions is not complied with.

SYMBOLS

Danger symbols: These symbols
indicate possible dangers. Read
the associated safety notices care-
fully and follow them.
Supplementary information
Read the operating instructions
before use!
Circuit symbol for alternating
~
current
Caution: Hot surfaces!
Suitable for use with food.

SIGNAL WORDS

Signal words indicate hazards if the asso-
ciated notices are not followed.
DANGER – high risk, results in serious
injury or death
WARNING – medium risk, may result in
serious injury or death
10
www.dspro.de/kundenservice
CAUTION – low risk, may result in minor
or moderate injury
NOTICE – may result in risk of damage to
material

INTENDED USE

■
■
■
■
The device is intended to be used to
make waffl es.
The device is for personal use only
and is not intended for commercial
or domestic-like applications, e.g. in
hotels, bed and breakfasts, offi ces,
staff kitchens or similar places.
Use the device only for the specifi ed
purpose and as described in the
operating instructions. Any other use
is deemed to be improper.
The warranty does not cover faults
caused by incorrect handling, dam-
age or attempted repairs. The same
applies to normal wear and tear.