Operation - ALM EarthWise 60420 Manuel De L'utilisateur

INSTALLING THE GRASS CATCHER
See figure 5
NOTE: When using the grass catcher, do not install
either the side discharge deflector or the mulching plug.

Lift the rear discharge door.

Lift the grass catcher by its handle and place under
the rear discharge door so that the hooks on the
grass catcher are seated on the hooks of the height
adjustment brackets.
SETTING BLADE HEIGHT
See figure 6.
When shipped, the wheels on the mower are set to a
low-cutting position. Before using the mower for the first
time, adjust the cutting position to the height best suited
for your lawn. The average lawn should be between
1-1/2 in. to 2 in. during the cool months and between
2 in. to 3 1/4 in. during the hot months.
To adjust the blade height:

To raise the blade height, grasp the height
adjustment lever and move it toward the back
of the mower.

To lower the blade height, grasp the height
adjustment lever and move it toward the front
of the mower.
WARNING:
Do not allow familiarity with this type of product to
make you careless. Remember that a careless frac-
tion of a second is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with
side shields when operating this product. Failure to do
so could result in objects being thrown into your eyes,
resulting in possible serious injury.
ASSEMBLY
GRASS CATCHER
HANDLE
REAR
DISCHARGE
DOOR
DOOR ROD
HIGHEST
BLADE
SETTING

OPERATION

WARNING:
Do not use any attachments or accessories not rec-
ommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATIONS:
You may use this product for the purpose listed below:

Mowing your lawn
11
HOOKS
HOOKS
Fig. 5
HEIGHT ADJUSTMENT
LEVER
LOWEST
BLADE
SETTING
Fig. 6