Assembly - ALM EarthWise TC70040 Manuel Du Propriétaire

This product must be assembled correctly before use.
1. Remove the screws (M5 X 12) and washers from
each end of the wheel frame axle. Assemble the
wheels onto the axle, then install washers and
screws (M5 X 12) to secure. (Fig. 2-1)
2. Press the hub caps into the wheels and cover the
ends of the axles. You may use a hammer to seat
the hub caps securely into the wheels. (Fig. 2-1)
3. Align the auxiliary handle with the lower handles.
Make sure the holes are aligned. (Fig. 2-2)
WARNING: If any parts are damaged or missing
do not operate this product until the parts are
replaced. Failure to heed this warning could result
in serious personal injury. Call our customer
service help line at 1-800-633-1501 for
assistance.
WARNING: Do not install battery until assembly is
complete. Failure to comply could result in
accidental starting and possible serious personal
injury.

ASSEMBLY

4. Attach the center handle to the auxiliary handle and
the lower handles using the two supplied M6 X 45
bolts and wing nuts. (Fig. 2-3)
5. Fasten the upper handle to the center handle using
the two supplied M6 X 45 bolts and wing nuts.
(Fig. 2-4)
6. Use the two supplied cable clips to secure the cord
to the handle. (Fig. 2-5)
7. Attach the key strap to the handle as shown.
(Fig. 2-6) When not in use, remove the key and
place it out of reach of children.
WARNING: Do not attempt to modify this product
or create accessories not recommended for use
with this product. Any such alteration or modification
is misuse and could result in a hazardous condition
leading to possible serious personal injury.
6
Model TC70040