VONROC VC506AC Traduction De La Notice Originale page 7

TECHNICAL SPECIFICATIONS
Model No.
Mains voltage
Mains frequency
Power input
Cable length
Protection category
Suction force
Container capacity approx.
Useful volume dry approx.
Useful volume wet approx.
Filter - dry
Filter - wet
Hose system
Diameter intake port (29 Fig. D) Ø52mm
Recommended dust bag
Weight (incl. all accessories)
approx.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-4.
1. On/Off switch
2. Carrying handle
3. Blowing port
4. Power cord storage
5. Blow function adapter
6. Top section
7. Locking clamp
8. Container
9. Base
10. Float
11. Castor wheels
12. Drainage outlet
13. Drainage outlet cap
14. Vacuum port
15. Filter cage
16. Nozzles storage
17. Hose
18. Handle adapter
19. Removable handle
20. Suction tubes
21. Wet and dry floor nozzle
22. Round brush nozzle
23. Crevice nozzle
WWW.VONROC.COM
VC506AC
220-240V~
50-60 Hz
1.400W
6m
IPX4
19 kPA, 1.8 m³/min
20 L
15 L
12L
HEPA filter
Foam filter
Ø32mm
VC805AA / VC809AA
6kg
24. Car vacuum tool
25. Power tool adapter
26. Dust collection bag
27. HEPA filter
28. Foam filter
29. Intake port
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
1. Press the container (8) on the base (9) as
shown in Fig. B. Make sure the base (9) is
securely fastened.
2. Fit the filter (27, 28). Ensure to mount the cor-
rect filter, depending on the application:
• For dry vacuum cleaning, carefully slide
the HEPA filter (27) over the filter cage (15)
making sure the entire cage (15) is covered
as shown in Fig. C-1.
• For wet vacuum cleaning, carefully slide
the foam filter (28) over the filter cage (15)
making sure the entire cage (15) is covered
as shown in Fig. C-2.
3. Place the top section (6) on the container (8).
4. Connect the suction hose (17).
• For vacuuming (Fig. E), connect the suction
hose (17) to the vacuum port (14).
• For blowing (Fig. F, G), connect the suction
hose (17) to the blowing port (3).
5. Connect the handle (19) to the handle adapter
(18). One or more suction tubes (20) can be fit
to the handle (19) to extend it (fig. A).
6. Connect the desired nozzle to the handle adapter
(18), handle(19) or suction tubes (20).
Wet and dry floor nozzle (21)
The floor nozzle is designed for domestic wet and
dry vacuuming in, for example, the house, work
room, or garage.
Round brush nozzle (22)
The brush is designed to vacuuming solids from
small areas.
Crevice nozzle (23)
The crevice nozzle is designed for domestic wet
and dry vacuuming, edges and other areas that are
difficult to access.
EN
7