Operating Instructions
ASSEMBLY INSTRUCTIONS
TM
1.
Put the CrocLock
rear leg lock lever (|13) and slide the rear leg (|12) from its sto-
red position. Pivot the leg fully and slide down to engage it
in the final locking position. Lock the rear leg lock lever. See
figs 1 – 3.
2.
Pivot the foot pedal (|5) until it "clicks" into position.
See fig 4.
3.
Pivot the front legs (|7) forward until they "click" into posi-
tion. See fig 5.
4. If required rotate the rear stability foot (|19), until it "clicks"
into position and secure with the locking lever. See fig 6.
5.
Turn the CrocLock
TM
are locked firmly in position, checking the front leg lock in-
dicators (|9) are showing the locked symbol. See fig 7.
6. The rear handle (|17) is self-assembly. Fit the spacer tube bet-
ween the bracket and fasten the handle in position with the
bolt and locking knob provided.
TM
7.
The CrocLock
can be moved easily in the assembled state
using the front and rear carry handles (|16 & |17) in combi-
nation. See fig 8.
FOLDING INSTRUCTIONS
Reverse the assembly instructions procedure:
1.
Ensure that the lock / unlock switch (|4) is in the unlock
position. See fig 9.
2.
Turn the CrocLock
TM
(|8) and pivot the front legs into the stored position.
3.
Release the foot pedal by disengaging the foot pedal lock (|6).
Move the foot pedal to the stored position. See fig 10.
4. Release the rear stability foot lock lever and pivot until it
"clicks" into the stored position. Release the rear leg lock lever
and move the rear leg into the stored position. Lock the rear
leg lock lever.
5.
The secondary carry handle (|18) can be used to carry the CrocLock
rear carry handle can be used to carry the CrocLock
figs 11 & 12.
upside down on the ground, loosen the
into an upright position. Ensure all legs
upside down. Release the front leg locks
fig. 3
fig. 7
fig. 9
fig. 11
TM
when folded. Alternatively the
TM
when in a folded and upright orientation. See
fig. 1
fig. 2
fig. 4
fig. 6
fig. 5
fig. 8
fig. 10
fig. 12
|
9
GB