Warranty - Jepson 9435 T3 Mode D'emploi

10. WARRANTY

The warranty time is 12 months from the day of purchase by the user.
It covers and is limited to the free replacement of the defective parts or the free repair
of defects that are demonstrably due to the use of imperfect materials during
production or due to assembly errors.
Incorrect use or start-up and unauthorised installations or repairs not specified in the
operating instructions void the warranty. Parts that are subject to wear are also exclu-
ded from the warranty. We expressly reserve the right to make decisions on the war-
ranty application. The warranty is cancelled if the device is opened by a third party.
Transport damages, maintenance work as well as damage and malfunctions due to
insufficient maintenance are not covered by the warranty.
For warranty claims, the proof of purchase of the device must be given by presenting
the delivery note, bill, or cash receipt.
As far as it is legal, we assume no liability for any personal, material or consequen-
tial damages, in particular if the device is used differently than for the purpose indi-
cated in the operating instructions, not installed or repaired according to the opera-
ting instructions, or repairs were executed by a layperson.
The warranty excludes wear parts such as:
Switches, flanges, carbon brushes, supportings and
saw blades.
The quality and safety of the JEPSON circular cold saw depends on the exclusive
use of original DRYTECH saw blades. The use of other saw blades may damage the
machines, if they are thicker than 2,2mm/ 0.09'' or have the wrong geometry.
In this case, the manufacturer assumes no liability.
11. Spare parts
For current spare parts list with order numbers please visit our website:
www.jepsonpower.com
14
29