Publicité
Les langues disponibles
Les langues disponibles
11 - DISPLAY/MODIFY SET
TEMPERATURE (via knobs):
S
t
COMFORT / t ECONOMY
The display normally shows room temperature detected
or current hours and minutes.
2
4
21
3
18
6
3
15
9
1
2
upon first start-up of the chronothermostat or after reset o
preset default temperatures are:
Comfort Temperature Set t = 20.0 °C / 68.0 °F (
Economy Temperature Set t = 17.0 °C / 62.6 °F (
In any chronothermostat operating condition, to display the current
settings, simply slightly turn the relative knob until the set itself
blinks. After 5 sec., the display will return to normal operation
visualisation. If settings do not meet user needs, it is possible to
modify them as desired at any time, from +5°C to +30 °C (from +41
°F to +86 °F), as per procedure shown to the side.
18
Knobs can be
Indicates setting
modification
turned without
opening the cover.
t
18
peration
,
Note: if a temperature limit was set (see following para-
upper knob
)
graph), the set value can be increased up to said limit
lower knob
)
(blocked setting).
Perform the same procedure to set the Set economy temperature
with knob t
1°
2
4
21
1
3
6
3
15
9
The desired Set starts to blink. Then, turn the knob
1
1
2
clockwise to increase or counter-clockwise to
2°
decrease (a variation of 0.1°C/0.1 °F at a time will
be obtained).
2
4
21
3
6
15
9
The temperature set
1
2
will thereby be the new
reference Set.
After 5 sec. from the last turn of the
3°
knob, the display will return to
regular operating conditions
Slightly turn the desired knob
(
comfort or
t
economy) to
v i e w t h e c u r r e n t S e t
temperature values and access
adjustment procedures.
2
4
21
3
+
18
6
15
9
1
2
2
4
21
1
3
6
18
3
15
9
1
1
2
21
Publicité
