Publicité
Les langues disponibles
Les langues disponibles
AC VOLTAGE MEASUREMENT
1. Connect red test leads to "V Ω mA" jack, black
leads to "COM" jack.
2. Set switch to desired ACV position.
3. Connect test leads to device or circuit being
measured.
4. Voltage value will appear on the display along with
the voltage polarity.
DC CURRENT MEASUREMENT
1. Connect red lead to "V Ω mA" jack, black leads to
"COM" jack.
2. Set switch to desired DCA position.
3. Open the circuit to be measured, and connect test
leads IN SERIES with the load in which current is to
be measured.
4. Read current value on the display.
RESISTANCE MEASUREMENT
1. Connect red lead to "V Ω mA" jack, black leads to
"COM" jack.
2. Set switch to desired Ω position.
3. If the resistance being measured is connected to a
circuit, turn off power and discharge all capacitors
before measurement.
4. Connect test leads to circuit being measured.
5. Read resistance value on the display.
78207i.indd 9
02-04-19 14:0
Publicité
