Publicité
Les langues disponibles
Les langues disponibles
DURING USE
- Never exceed the limit protection values indicated
in the specifications of each type of measurement.
- When the multimeter is assigned to one type of
measurement, do not touch the terminals not in use.
- Never use the multimeter to measure voltages that
might be in excess of 600 V above the earth wire in
category III installations.
- When the level of values to be measured is unknown
prior to commencing measurement, place the level
selector at the highest position.
- Before turning the selector to change the functions,
disconnect the test cables form the circuit to be
measured.
- When carrying out measurement on television or
electronic switch circuits, always remember that
there could be high range voltage pulse in the
control points which could break the meter.
- When working with voltages above 60V DC or 30C
AC or rms, keep your fingers behind the barriers
while measuring.
- Never carry out resistance measurements on
operating circuits.
78207i.indd 4
02-04-19 14:0
Publicité
