First Use; Scope Of Delivery; Device Function; Operation And Function - Riester metpak Mode D'emploi

2. First use

2.1 Scope of delivery

Art.no. 5270 metpak for 500 ml - User manual
Art.no. 5275 metpak for 1000 ml - User manual
Art.no. 5270-536 metpak for 3000 ml - User manual
Art.no. 5270-537 metpak for 5000 ml - User manual

2.2 Device function

4.1. Cuff cover with mesh insert
4.2. Rear hanging loop
4.3. Front hanging loop
4.4. Manometer
4.5. Air release valve
4.6. Bulb

3. Operation and function

3.1 Symbol identification

mm Hg Millimetres of mercury - Unit of measurement for specifying the static
pressure

3.2 Startup

Make sure you have acquired the correct metpak model and size for the in-
fusion bags with blood or solutions you areusing (see 2.1)
Check the connection of the bulb (4.6.) with air release valve (4.5.)
(blower) to the tube.
Close the air release valve (4.5.)
Lift the mesh insert on the cuff cover.
Slide the infusion bag, with the bag opening
downwards, under the mesh insert until the
front hanging loop can be threaded through the opening on the bag.
Pull the rear hanging loop through the front hanging loop and hang the com-
plete unit on the IV pole.
Generate the desired pressure by inflating the bulb (4.6.). You can read the
values on the pressure scale on the manometer (4.4.).
4.4.
4.2.
4.3.
4.1.
4.6.
4.5.
13