Appliance Installation; Electrical Connection - Olimpia splendid CALDO TRENDY ST Instructions Pour L'installation, L'emploi Et L'entretien

6 - APPLIANCE INSTALLATION

• The appliance does not require installation and must exclusively be used as a
portable device.
• After removing the packaging, check that the appliance is in perfect condition; in
case of doubts do not use it and refer to professionally qualified personnel.
• Entirely straighten the power cord.
• Place the appliance in an appropriate environment and on a stable and flat surface.
The appliance must be installed:
• in such a way as to prevent the ON/OFF switch and the buttons
from being touched by who is standing in the bathtub or in the
shower.
• At a distance of at least 1 m from walls
To avoid the risk of fire, keep the air outlets of the appliance at a
distance of at least 1 m from any object, fabric or flammable ma-
terials (fig.2).
• Before connecting the appliance plug to the power outlet, make
sure that the voltage values indicated on the data plate corre-
spond to the mains supply ones and that the outlet is equipped
with an efficient grounding.
• In case of incompatibility between the outlet and the plug of the
appliance, let the outlet be replaced with another one of the suit-
able type by professionally qualified personnel, which verify that
the outlet cables section is suitable for the power absorbed by
the appliance. Generally, it's not advised to use adapters and/
or extension cords; if their use should become essential, they
must comply with the current safety standards and their current
capacity (A) mustn't be lower than the appliance maximum one.
• The socket must be easily accessible so that the plug can be
removed easily in an emergency.
a. Insert the plug in the power outlet.
b. Press "I" (ON) on the switch (6); the appliance is ready for use.
EN - 10

6.1 - Electrical connection