TRENDY
54 04 46xx-XL
4. Assembling the wardrobe
Step 1 : Use the long crossbars 16B, both crossbars 16A, both short crossbars 17, ten eccentrics E, both
front legs 14A, the intermediate leg 15, both rear legs 14B and ten connectors D
Push two eccentrics (E) in the provided drillings on the inside of all crossbars (16A - 16B and 17). Tighten
two connectors (D) in the provided holes on the inside of the legs (14A, 14B and 15).
Step 2 : Use the parts of step 1
Push a front (14A) and a rear leg (14B) with its connectors into the holes and over the wooden dowels of
short crossbars (17). Tighten the eccentrics. Push a leg frame with its connectors in the drillings and on the
wooden dowels of a crossbars (16A and 16B). Tighten the eccentrics. Push the intermediate leg (15) with
its connecting bolt into the drilling and over the wooden dowel of the crossbar (16A). Tighten the eccentric.
Press the other leg frame with its connection bolt in the drilling and over the wooden dowel of a transverse
bar (16A). Tighten the eccentric. Push the frames together and tighten the eccentrics.
Kleerkast met drie draaideuren
Schrankwand mit drei Türen
Armoire avec 3 portes battantes
Wardrobe with three doors
Quax
Quax
First dreams
First dreams
®
®
First steps
First steps
41