5| ANNEXES
5.1 REFRIGERATING UNITS DIGITAL CONTROLLER INSTRUCTIONS
Access and use of the menu to adjust the temperature of the equipment:
- Machine status menu: Press and release the "SET" (*) key.
(*) The word "SEt" will appear on the display. You can then use the keys on the left of the control panel to access the
different menu modes:
- SEt: Settings (**)
(**) Parameter settings: To display the set point, press the "SET" key when the word "SEt" is displayed. The set point value
appears on the display, to change it, press the keys on the left of the controller for a maximum period of 15 seconds.
Finally, press the "SET" key again to confirm the modification of the set point.
Traducción de las instrucciones originales
EWPlus 961/971/974EO
11