Publicité
Les langues disponibles
Les langues disponibles
For use, the fan heater operates as follows:
1.
Insert the plug in the wall socket.
Switch on the main switch (pos."I"): the led above the control panel will light up to show that
2.
the heater is connected to the main line.
Turn the "
3.
Select the required function, by pressing the "
4.
remote control); each time the button is pressed the display will light up the required function
(900W=light
5.
The room temperature: keeps room temperature constantly at the set value. Temperature range
between 4°C and 32°C is selected from panel and remote control, press "
pressing either the "+" or "-" key to increase or reduce the temperature shown on the display at
the time Example: if we want temperature at 30°C, you must select the "+" key until on the
LED show 30°C, then the 30°C flash for some seconds, and then the LED show the effective
temperature of the room temperature, then some time the temperature will increase and on the
LED will show the room temperature updated until at 30°C. When on the LED will show 30°C,
the appliance always function, but will decrease the out power. The appliance will start
automatically to function when the temperature decrese on the room temperature.
To obtain the oscillation function, press the "
6.
To deactivate this function, press also the "
7.
Timer: this function allows setting the operating time and the fan will automatically stop at the
end. To set the operating time, repeatedly press the "
control panel: every time the key is pressed, the time set is changed and the indicator light on
the control panel lights corresponding to the time selected (1 hour, 2 hours,... 8 hours): the
maximum time is 8 hours. To deactivate the time, press the "
"0h".
When switching off the appliance, press the switch "
8.
When the appliance is not in use for long periods, remove the plug from the wall socket.
If the fan heater is hit accidentally causing it to fall over, the safety security on the appliance will
switch off the heater automatically: by replacing the heater in its correct position and reselect the
function with the control panel or remote control.
CLEANING AND MAINTENANCE
Attention: before cleaning the fan heater, turn it off, remove the plug from the outlet and wait for it
to cool.
Periodically check that the air-intake grill is not obstructed by fuzz or threads.
Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive
products.
For long periods of inactivity, you must cover it and place it in a dry place; it is advisable to put it
in its original packaging to protect it from dust and humidity.
A special tool is required to replace the electrical cord: contact an authorized service center, also
for any repairs.
If you decide not to use the fan heater, we recommend that you make it inoperative by cutting the
power cord (but first make sure you have removed the plug from the electrical outlet), and make
those parts harmless that are dangerous when played with by children.
" switch (on the panel or the remote control), to start up the high function "
and 1800W=light
),
" button several times (on the panel or the
" button (on the panel or the remote control).
" button.
" key on the remote control or the
" until on the display show
" (on the panel or the remote control).
9
16
/
".
" key, if
Publicité
