Publicité
Les langues disponibles
Les langues disponibles
Figure 2 - Placing connecting rod in rain cover.
4.
Place the rod assemblies in the
opening provided for this purpose in
the fabric, with the short, hollow rod
first.
Figure 3 - Placing rod assembly in rain cover.
5.
Attach the two adapters
Use the M4x20 bolt
⓮
on the underside and the M6x20 bolt
Figure 4 - Attaching the adapters to the frame.
Long straight rod
Short hollow rod
❽
to the bike.
❻
and M4 washer
❼
and M6 washer
6.
Screw the press connectors
front of the Lovens Explorer. Fix these
in place using a 9 mm open-ended
wrench.
Figure 5 - Attaching the screw with press connector.
7.
Insert the countersunk screw
the loop connector
Figure 6 - Placing flathead screw in loop connector.
8.
Turn the
screw with loop connectors
into the rear of the Lovens Explorer.
Figure 7 - Attaching the screw with loop connector.
⓭
on the side.
❾
into the
❿
into
⓫
.
9
EN
Publicité
