Publicité
Les langues disponibles
Les langues disponibles
1. Warranty
•
Read the user manual of the Lovens
Explorer for the general terms and
EN
conditions and safety instructions for
use of the Lovens Explorer.
•
Lovens offers a three-year warranty
against manufacturing and/or
production defects.
•
The warranty requires the use of only
original parts. If other parts are used,
Lovens cannot be held liable for any
damage.
•
Ensure that the rain cover is properly
fastened as described in the user
manual. Incorrect attachment may
cause damage to the rain cover and/or
hazardous situations.
•
Modifying the rain cover yourself is not
permitted. If this is done, functionality
can change and the warranty will be
voided.
•
The
warranty is valid from the moment
at which the dealer sells the rain
cover to the consumer. This means
it is important to keep your proof of
purchase in a safe place.
•
This rain cover is only suitable for the
Lovens Explorer from Lovens.
2.
Requirements
2.1 Own parts
•
Certain tools are required to install the
rain cover. Ensure that you have the
following tools:
•
Open-ended wrench 9 mm
•
Hex wrench 3
•
Hex wrench 4
8
.
2.2 Product parts
❶
❷
❸
❹
❺
❻
.
❼
3. Instructions
3.1 Installation instructions
1.
2.
3.
1
2
3
4
5
6
7
8
9
10
Figure 1 - Lovens Explorer rain cover main parts.
❽
Rain cover
Adapter (2x)
❾
Long straight rod (2x)
Bolt with press connector (2x)
❿
Angled rod (2x)
Loop connector (2x)
⓫
Short hollow rod (2x)
Countersunk screw (2x)
⓬
Connecting rod
Cap for loop connector (2x)
⓭
M4x20 bolt (2x)
M6 washer (2x)
⓮
M6x20 bolt (2x)
M4 washer (2x)
Place the fabric part of the rain
❶
cover
on a clean surface to avoid
scratching the fabric and windows.
Open the Velcro strip at the top of the
❶
rain cover
and slide the connecting
❺
rod
in the opening of the rain cover.
❹
Slide the short
and long rods
together.
11
12
13
14
.
❷
Publicité
