JANE TRANSPORTER 2 Instructions page 27

MAINTENANCE
Do not expose the cover to sunlight for long periods. When the
seat is not in use, cover it or store it in the boot.
Wash the plastic parts with warm water and soap, carefully drying
all the components afterwards.
The upholstery can be removed for washing. Follow the instruc-
tions below:
• Remove the rubber band that goes underneath one of the car seat belt
fasteners and undo the clasps from the other.
• Also the plastic flaps that are on the sides of the carrycot.
• Remove the upholstery from the edges of your TRANSPORTER carrycot.
• Undo the safety harness clasp and pass it through the slot in the
mattress upholstery.
• Take the upholstery off the backrest and pass the shoulder straps
through the slots.
• Pull the mattress and take the upholstery off by opening the central
part.
Wash by hand at a temperature never higher than 30° C.
To refit the cover, follow the same steps in reverse order.
For your safety and the good conservation of this product, it is im-
portant to bring it to one of our official workshops for regular ins-
pections.
You can access the link: www.jane.es
for further information on fitting your new TRANSPORTER.
27 27