Supported Protocols; Ftp; Ptp / Ip - Nikon WT-2 Mode D'emploi

Supported Protocols

The WT-2 wireless transmitter is a wireless LAN adapter that allows the cam-
era to be controlled remotely from a computer running Nikon Capture 4 ver-
sion 4.2 or later (available separately) or photographs to be upload to an ftp
server over a wireless LAN. The WT-2 supports the following protocols:

ftp (

5)
New photographs and photographs stored on the camera memory card can
be uploaded to an ftp server via a wireless LAN.
A/ V
OU T
DC
IN
WT-2
* Infrastructure mode only; not required in ad-hoc mode (

PTP / IP (

14)
The camera can be controlled from a computer on the same network and pic-
tures saved directly to the computer hard disk using Nikon Capture 4 version
4.2 or later (available separately; connection via router not supported).
A/ V
OU T
DC
IN
WT-2
* Infrastructure mode only; not required in ad-hoc mode (
An environment with a wireless LAN is required to use the WT-2. An ftp server
is required for ftp. Operation has been confi rmed on the following systems:
• ftp: Windows Server 2003, Windows 2000 Server, Windows XP Professional,
Windows 2000 Professional, Mac OS X Server, Mac OS X. Internet ftp con-
nections and ftp servers running third-party software are not supported.
• PTP / IP: Windows XP Professional, Windows XP Home Edition, Mac OS X
(version 10.3 or later).
For the latest information on supported operating systems, see the Nikon
website for your area (
2
Wireless LAN
access point
Wireless LAN
access point
1).
*
27).
*
27).
ftp server
Computer