Uploading Images - Nikon WT-2 Mode D'emploi

Uploading Images

1
Press the
memory card. Display the fi rst picture to be sent
in single-image playback or highlight it in the
thumbnail list.
2
Press the center of the multi selector while press-
ing the button. The image will be marked with
a white "send" icon and transmission will begin
immediately. During upload, images are marked
with a green "sending" icon. Repeat this process
to send additional images (pictures will be sent in
the order selected).
Images that have been successfully uploaded are
marked with a blue "sent" icon.
During Upload
Do not remove the memory card from the camera during upload.
File Names
If the destination folder on the ftp server contains fi les with the same names as images
selected for upload, the fi les on the server will be replaced by the images uploaded
from the camera.
Loss of Signal
Transmission may be interrupted if the signal is lost (
sumed by turning the camera off and then on again, activating the camera exposure
meters, or selecting On for Wireless LAN > Wireless LAN system once the signal is
restored.
Voice Memos
Voice memos can not be uploaded separately, but will be included when the associated
pictures are transmitted.
10
button to view pictures on the
+
13). Transmission can be re-
100-1