Setup Using The Connection Wizard - Nikon WT-2 Mode D'emploi

Setup Using the Connection Wizard

First-time setup can be completed with the help of the Connection Wizard.
Before starting the Connection Wizard, make sure that network is active and
the destination ftp server is running. To prevent changes to settings from be-
ing lost should the camera monitor turn off automatically, use the optional AC
adapter or choose the maximum camera monitor off delay.
1
Turn the camera on.
2
Check that Off is selected for the Wireless LAN >
Wireless LAN system option in the camera setup
menu ( 24).
3
Select FTP for Wireless LAN > Mode (
Wireless Network Settings
For information on adjusting wireless network settings without using the Connection
Wizard, see "Menu Guide" (
tings fi les created with a computer.
ftp Mode Settings
In addition to the settings made with the Connection Wizard, the following options are
available in ftp mode:
Option
Auto send
Delete after send?
Send fi le as:
Send folder
Deselect all?
6
26–35). See page 25 for information on loading set-
Upload photos to server as they are taken.
Delete photos from camera memory card after upload.
Send NEF + JPEG images as JPEG only or as NEF and JPEG.
Upload all photos in selected folder.
Deselect all images selected for upload.
24).
Description
37
37
38
38
38