Syride SYS'Nav Guide D'utilisation page 46

In order to upload airspaces to your SYS'Nav :
1) On the SYS PC Tool, click the menu « Navigation », then « Download an OpenAir file »
2) Turn on your SYS'Nav, and connect it to your computer.
3) On the SYS PC Tool, click the menu « Navigation », then « Send an OpenAir file »
4) Select the previously downloaded OpenAir file.
To locate airspaces, you have 2 options :
- The MAP screen will show you the airspaces
- Some indicators are available on the SSCTool, like the name, the horizontal and vertical
distance of the nearest airspace.
There are 2 visual warning with a siren that informs you are near an airspace :
PRE VIOLATION
Both PRE-VIOLATION and VIOLATION warnings emit a siren during a few seconds. If
you loose the GPS signal, then the siren will run again when getting the GPS fix back.
44
All manuals and user guides at all-guides.com
PRE VIOLATION blinks on top of
the screen when the distance
(vertical or horizontal) to the
nearest airspace is within the
predefined VAS and HAS values.
VIOLATION
VIOLATION blinks on
top of the
when you are inside
an airspace.
EN
screen