5. BACKLIGHT AND NIGHTLIGHT
5.1 Backlight
The clock backlight automatically adjusts depending on the time.
●
0:00 AM - 7:00 AM Low Brightness Display.
●
7:00 AM - 6:00 PM High Brightness Display.
●
6:00 PM – 0:00 AM Medium Brightness Display.
Note: These times cannot be adjusted.
The clock backlight can be manually adjusted.
●
Press the '+' Button to make the display brighter.
●
Press the '-' Button to make the display darker.
The levels of brightness are Off > Low > Medium > High.
5.2 Nightlight
On the underside of the clock is a built in Nightlight.
●
Press the '
' to activate the nightlight.
●
Press again to manually change the colour of the light.
●
The nightlight cycles through the colours:
●
White > Auto Colour Change > Red > Yellow > Light Green > Dark Green > Light Blue >
Dark Blue > Pink > Light Off.
The night light does not automatically turn off.
●
6. WIRELESS CHARGING
6.1 Wireless Charging Information
●
The wireless charger has a range of approx 8mm, please remove any large cases which
may put your device further away from the charging surface than this.
●
Place your wireless charging device on the QI charging surface.
●
The wireless receiver in your device should be positioned over the middle of the
charging surface. (Check the technical specifications of your device for the location of the
receiver).
●
If positioned correctly your device should start to charge and the charging indicator will
be solid blue.
●
When your device is fully charged the charging indicator will turn off.
If you find your device is not charging please ensure it is compatible with QI charging and
●
it is positioned correctly on the charging surface.
8