Alarm Setup; Setting The Alarm; Activating And Deactivating The Alarm - THINK GIZMOS TG809 Manuel De L'utilisateur

4. ALARM SETUP

4.1 Setting the Alarm

● Press and hold the '
Alarm 1 will show and the minute will start flashing. Use the +/- buttons to adjust the
●
minutes.
● Press the '
the hour.
Press the '
●
the +/- buttons to adjust the minute.
Press the '
●
the hour.
Press the '
●

4.2 Activating and Deactivating the Alarm

Press and hold the '+' button for 3 seconds to activate alarm 1. The alarm 1 icon will
●
show on the left of the display.
Press and hold the '+' button for 3 seconds to deactivate alarm 1.
●
● Press and hold the '-' button for 3 seconds to activate alarm 2. The alarm 2 icon will show
on the left of the display.
● Press and hold the '-' button for 3 seconds to deactivate alarm 2.
4.2 Snooze Function
● Touch any key on the clock when the alarm is sounding to enable the snooze mode.
● The alarm will sound again after 5 minutes and the snooze function can be repeated 3
times.
● When the snooze function is active the Alarm icon will flash.
While sleep mode is active the '
●
● Press and hold the + or - button depening on which alarm activated to deactivate the
alarm and enable the '
● After the alarm is stopped it will be deactivated.
● To activate the alarm follow the instructions in part 4.2 above.
' button for 3 seconds.
' button, the hour number will start to flash. Use the +/- buttons to adjust
' button. Alarm 2 will show and the minute number will start to flash. Use
' button, the hour number will start to flash. Use the +/- buttons to adjust
' Button again to finish setting the alarms.
' Button.
' Button will not function.
7