Orbegozo REH 1060 Manuel D'instructions page 22

REH 1060/REH
1560/REH 2060
Press or button to select the desired temperature from a range of 5°-40°C. the
temperature shows in 2 sets numbers, the left number shows current temperature, the right number
shows setting temperature
WEEKLY TIMER MODE
Press to change the mode from standby mode to work mode, the display shows as below
image 5, shows in the screen.
Press button to choose weekly time, For example, Monday to Friday, 2. Monday to Saturday, 3,
Wednesday, Friday......, see image 6.
After choose the weekly timer, press
Press button to set the the start time, press
press button to 9:00, it means from 0:00 to 9:00, the heater keep working, then press
button to set the stop time, if set 12:00, it will stop on 12:00, and then press
until 24 hours all was setting, it will show current time when the setting is finish
button to set the heat settings.
button to set the stop time. For example,
and again
22