Orbegozo REH 1060 Manuel D'instructions page 20

REH 1060/REH
1560/REH 2060
INSTALLATION (WHILE USE ON THE FLOOR AS PORTABLE APPLIANCE)
Please attach the feet on the heater's housing, and fixing them with supplied ST12x4mm
(8pcs) screws.
WALL MOUNTING (WHILE USE THE HEATER AS FIXED APPLIANCE)
Please note that the product must be installed at least 15 cm from the floor and 50 cm from
the ceiling.
-For wall mounting study scheme
• Uninstall the bracket from the body.See the image1
• Drill the holes at each sides on the wall, then insert the plastic expanded plugs within
Fix the bracket in the wall with screw. See the image 3
• Fit the heater into suitable position ensuing that the holes align with bracket. See
image 3
• Tight the screw on the top of bracket to catch steady. See image 4
20