Outwell ASADO Instructions D'assemblage page 8

TROUBLE SHOOTING
PROBLEM
Burners will not light using the
ignition system
Burner will not light with a
match
Low flame or flashback (fire in
burner tube-a hissing or roaring
noise may be heard)
Due to production continuously developing, the product you bought might slightly differ from the one in this manual.
POSSIBLE CAUSE
1. LP gas cylinder is empty
2. Faulty regulator
3. Obstructions in burner
4. Obstructions in gas jets or
gas hose
5. Electrode wire loose or
disconnected on electrode or
ignition unit
6. Electrode or wire is damaged
faulty pushbutton igniter
7. The distance between the
burner and the electrode pin
is too large or too small
1. LG gas cylinder is empty
2. Faulty regulator
3. Obstructions in burner
4. Obstructions in gas jets or
gas hose
1. LP gas cylinder too small
2. Obstructions in burner
3. Obstructions in gas jets or
gas hose
4. Windy conditions
8
SOLUTION
1. Replace with full cylinder
2. Have regulator checked or
replace
3. Clean burner
4. Clean jets and gas hose
5. Reconnect wire
6. Change electrode and wire
change igniter
7. Check and ensure the
distance between the burner
and the electrode pin is
2-4 mm
1. Replace with full cylinder
2. Have regulator checked or
replace
3. Clean burner
4. Clean jets and gas hose
1. Use larger cylinder
2. Clean burner
3. Clean jets and gas hose
4. Use BBQ in a more sheltered
position