EN
Thank you for choosing an appliance
from our range, which is intended to
make life easier for you when
preparing food.
Description
a
Motor unit
b
Speed selector (0/1/2/Pulse)
c
Cord winder
d
Blender jug
d1 Lid with pusher-stopper
d2 Glass jug
d3 Blade unit
Safety instructions
- Read the instructions for use careful-
ly before using your appliance for the
first time and retain them for future
reference : any use which does not
conform to these instructions will
absolve us from any liability.
- This appliance is not designed to be
used by persons (including children)
with reduced physical, sensorial or
mental capacities, or by people with no
prior knowledge or experience except
where they have benefited from
supervision or previous instructions
relating to the use of the appliance,
from a person responsible for their
safety.
- Children should not be allowed to play
with the appliance.
- Check that the power rating of your
appliance matches that of your
electrical system.
- This product has been designed for
domestic use only. Any commercial
use, inappropriate use or failure to
comply with instructions, the manu-
facturer accepts no responsibility and
the guarantee will not apply.
- Unplug your appliance as soon as
you have finished using it and when
you are cleaning it or in the event of
a power failure.
- Do not use your appliance if it is not
working correctly or if it has been
damaged. If this happens, please
contact an approved service centre
(see list in the service booklet).
- If the power supply cord is damaged,
it must be replaced by the
manufacturer, their after-sales service
or a person with similar qualification
to avoid any danger.
- Any connection error will invalidate
the guarantee.
- Any intervention other than cleaning
and normal maintenance by the cus-
tomer must be carried out by an
approved service centre.
- Never place the appliance, the power
cord or the plug in water or in any
other liquid.
- Never allow the power cord to hang
down within reach of children.
- The power cord must never be close
to or in contact with the hot parts of
your appliance, close to a source of
heat or resting on a sharp edge.
- If the power cord or the plug are
damaged, do not use the appliance.
To avoid any risk, these must be
replaced by an approved service
centre (see list in the service
booklet).
- For your own safety, you should use
only the accessories and spare parts
which are suitable for your appliance.
- All appliances are subject to strict
quality control. Practical user tests are
performed with appliances selected at
random, which explains any slight signs
of use.
- Handle the blades with great care.
They can cause injury.
- Do not let long hair, scarves, ties, etc. hang
over accessories when in operation.
- Use your appliance on a flat, clean
and dry surface.
- Do not put your fingers or any other
object inside the blender jug while in use.
- Never run the appliance empty or
4
with dry products only and never
pour liquids > 80° into it.
- Always use the blender jug with the
lid in place.
- Do not use continuously for more
than 1 1/2 min. Wait for a few
minutes before starting the appliance
again.
Getting started
- Before using your new appliance
for the first time, you should wash
the blender jug in hot, soapy water.
Rinse and dry with care.
- Important notes :
- Position the selector (b) to the set-
ting " O " before placing the blen-
der jug on the motor unit.
- The appliance will only start if the
blender jug is correctly positioned on
the motor unit.
Using the blender
- Dampen the seal of the blade unit
(d3).
- Place the blade unit (d3) in the jug
(d2) and fix it in position by turning
until it locks (1).
- Check that the jug is correctly locked
onto the blade unit.
- Make certain the markings
and
M
located under the blade unit are set
M
opposite each other
- Position the blender jug (d) on the
motor unit (a) (2).
- Put all the ingredients into the jug
without going over the maximum level
(1,2 l). For a smoother mixture, put
the liquid ingredients in first and run
the blender for a moment before put-
ting in the solid ingredients.
- Place the lid (d1) on the jug and lock
it in position (3). To make locking
easier, dampen the integral seal on
the lid. The lid must always be in
place when the appliance is in
operation.
- Plug in the appliance.
- Set the speed, using the selector (b).
- To stop the appliance, turn the
selector (b) back to position " O ".
Tips :
- Speed 1 : to start liquid preparations.
- Speed 2 : to blend preparations.
- Pulse : instant speed obtained by
successive movements of the selec-
tor (b) in the " Pulse " setting. " Pulse
" position allows you to process hard
ingredients and to give a final touch
to your preparation.
- For liquid preparations, cover the bla-
des (d3) to avoid splashes in the
interior of the jug and to facilitate the
blending of the ingredients.
- For thick mixtures, you can always
stop the appliance during preparation
to push the ingredients back down
onto the blades.
- Do not use continuously for more
than 1 1/2 min.
Ice Crushing
- Put some ice cubes into the jug
(12 to 15 ice cube).
- Push by impulse on the " Ice Crusher
" button.
Cleaning
- Unplug the appliance.
- The blender jug can be washed in the
dishwasher. Rinse and dry each part
well.
- Clean the motor unit (a) using a
damp cloth. Dry with care.
- Never place the motor unit in water or
under running water.
- The plastic base of the glass jug (d2)
cannot be removed.
- Handle blades with great care. They
can cause injury.
- Over time the strong coloured natural
juices from food such as carrots and
beetroot may stain the plastic parts of
your appliance - this is normal.
- This parts may be cleaned by
soaking them in mild bleach
(non abrasive) straight after use.
5