Cisco Systems Linksys WAG54G Guide D'installation Rapide page 3

If you are connecting more
than four PCs to the Gateway,
you will also need to connect
a hub or switch to the
Gateway.
NOTE: If your PC's Ethernet
adapter is not set up,
refer to the Ethernet
adapter's user guide for
more information.
D
Connect the power adapter to
the Gateway. Connect the
power adapter to the electrical
outlet. (Figure D)
E
Turn on the Gateway. Then,
turn on the first PC that you
want to use to configure the
Gateway.
IMPORTANT:
place the microfilter or splitter
between the phone and the wall
jack and not between the Gateway
and the wall jack. Otherwise your
ADSL will not connect.
Proceed to Step 2: Configure the
ADSL Gateway.
Make sure you only
D
3