Kongskilde KF 12 Instructions De Montage Et Mode D'emploi page 8

portion to each other. By adjusting
the plates in porportion to each
other the air resistance can be
adjusted in such a way that no vac-
cum will be available in the material
outlet of the cyclone.
Technical data:
Max. cleaning capacity (barley),
ton/h*
Wiring
kW (hp)
Rpm
Max. rotor rpm
Motor type
Weight (incl. motor), kg
Pipe dimension for blower
Max. recommended pipe
lenght at blower outlet, meter
*) Horizontal pipe incl. 2 pcs. 90°
bends and 1 cyclone.
The data stated will apply for 50
Hz. The pre-cleaner is also availa-
ble for 60 Hz.
8
Adjustment of the
pre-cleaner
The cleaning process can be ad-
justed by the handle on the air
regulator of the fan.
Turn the handle till „whole grains"
are coming out.
KF 12
12
3 x 400V / 50Hz 3 x 400V / 50Hz
0,75 (1,0) 1,5 (2,0)
3.000
75
OK160
25
Then push the handle slowly to the
position, being suitable for the job.
Check at some intervals the sepa-
rated material and adjust if neces-
sary.
KF 20 KF 40
20 40
3 x 400V / 50Hz
5,5 (7,5)
3.000 3.000
3.000
Standard flanged motor
105 250
OK200 Ø300
15 15
KF 60
60
3 x 400V / 50Hz
7,5 (10,0)
3.000
260
Ø300
15