Panasonic WV-CF324 Mode D'emploi page 10

• Adaptive Black Stretch selector [B.S.]
ON: The dark area of the object is auto-
matically corrected to lighten it.
OFF: Does not compensate.
Default setting: ON
Important: In the case of "ON" setting,
noise may be increased in the dark
area of the object.
In addition, darkness and brightness
may be emphasized in the vicinity of
the boundary between the dark and
bright areas.
• Backlight compensation selector [BLC]
ON: Compensates the background auto-
matically if it is brighter than the
object.
OFF: This mode is used when the front
of the object is extremely bright.
Default setting: OFF
Note: Under
extremely
desired compensation effect may
not be achieved even with this mode
set to ON to detect the backlight
level.
• Light control mode selector
[ALC/ELC]
ALC: Adjusts the lens iris automatically.
ELC: This mode is used for manual
focus adjustment.
Default setting: ALC
t LED for AF
y Shipping lock screw (blue screw)
Remove this screw before setting the
camera.
u Azimuth adjuster
Adjusts the azimuth angle of the cam-
era.
i Tilting table
Adjusts the tilting position of the camera.
10
conditions such
strong backlight,
o Focus lever
!0 Zoom lock lever
!1 Panning table
Adjusts the panning position of the cam-
era.
!2 Panning table lock screw [LOCK]
Fixes the panning table.
!3 Power cable
Supplies 24 V AC or 12 V DC from an
external power source.
as
the