Wittkopp Basic Manuel D'utilisation page 17

Masquer les pouces Voir aussi pour Basic:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.3 Changing the opening delay
You can only change the opening delay during the opening window.
Step
1.
Enter the user or master code, for example 567891
The opening delay time starts, the red light illuminates every
2.
few seconds
When the opening delay has elapsed, you will hear an audible
3.
signal and the opening window begins. The light illuminates
every few seconds.
4.
Press and hold the '9' button until the red light stays on
5.
Key in the master code, for example 567891
Enter the opening delay time using two digits,
6.
for example 20 minutes
Enter the opening window time using two digits,
7.
for example 2 minutes
8.
Repeat the new opening delay time
Repeat new opening window time.
9.
The opening delay has now been changed.
3.4 Deactivating the opening delay
You can only change the opening delay during the opening window.
Step
1.
Enter the user or master code, for example 567891
The opening delay time starts, the red light illuminates every
2.
few seconds
When the opening delay has elapsed, you will hear an audible
3.
signal and the opening window begins. The light illuminates
every few seconds.
4.
Press and hold the '9' button until the red light stays on
5.
Key in the master code, for example 567891
6.
Key in 00 (= 0 minutes) to deactivate the opening delay
7.
Key in 01 to deactivate opening window
8.
Repeat 00 to deactivate the opening delay
Repeat 01 to deactivate opening window.
9.
The opening delay is now disabled.
Action
Action
Key
567891
9
567891
20
02
20
02
Key
567891
9
567891
00
01
00
01
17

Publicité

Table des Matières
loading

Table des Matières