Increase The Efficiency Of Mobile Air Conditioning; Cleaning And Storage - Noaton AC 5109 Mode D'emploi

5. By pulling on both ends of the hose (1) you will stretch it out till its maximum length (160 cm).
6. Attach one end of the hose to the hose adapter (2)
7. Attach the other end of the hose to the hose end-piece (3)
8. Attach the hose using the adapter (2) to the rear of the appliance. The adapter should snap
into place.

Increase the efficiency of mobile air conditioning

If you have classic tilt & turn windows (Eurowindows) we
recommend to use a textile seal Noaton AL 4010 in order to
seal a gap between a frame and a gasket once the air hose is installed.

Cleaning and storage

Before cleaning your unit, ensure that it is switched off and unplugged from the socket. Clean the
appliance using a soft, dry cloth. Prevent any water from penetrating into the machine. Do not
use any chemical agents or abrasive preparations on the surface of the appliance. The filter can
be vacuum cleaned or washed in warm soapy water. Make sure it is completely dry before
reinstallation. The filter should be checked once a week.
Before relocating the air conditioner or moving it into storage, drain off the water using the
drainage hose.
Prior to storage, let the appliance run for 4–6 hours in fan mode to let the inner components of the
machine dry out completely and remaining water residue evaporate away
When storing the appliance, use the cable space at the rear of the machine for storing the power
supply cable. Clean the filter and place in a plastic bag or in its original box in order to protect the fan
against dust.
43