camry CR 1160 Mode D'emploi page 6

5. The disc will play until the end of the last track.
SKIPPING TRACKS
During playback of the disc, you can skip a track and move to the next one. Press
the UP/F.F button (27). The player will begin playing the next track.
During playback of the disc you can return to the previous track. Press the DN/F.R button (26).
CAUTION: Pressing and holding the UP/F.F button (27) or DN/F.R button (26) allows fast forwarding/rewinding of the track.
REPEAT DISC/TRACK OPTION
When the tracks are being played back, press the PLAY.MODE button (28) respectively as per the following instructions:
1. To repeat one track – set the track number by using the DN/F.R button (26) and the UP/F.F button (27). Press the PLAY.MODE button
(28) once. The left upper corner of the display will show the REP symbol, which indicates the repeat mode.
2. To repeat all the tracks on the disc – press the PLAY.MODE button (28) twice. The left upper corner of the display will show an underlined
REP symbol. After playback of the last track, the player will restart playing the first track.
3. Repeating once album from a disc (for MP3 discs) – press the PLAY.MODE button (28) three times. The left upper corner of the display
will show an the 'REP ALBUM' symbol. After playback of the last track in the current album (folder), the player will restart playing the first
track.
4. To disable the repeat function, re-press the PLAY.MODE button (28) until the REP or RANDOM symbol disappears from the display.
RANDOM PLAYBACK OPTION
To activate random playback press the PLAY.MODE button (28) three times (four times for USB playback). The RANDOM symbol will
appear in the right upper corner. To disable random playback re-press the PLAY.MODE button (28).
PROGRAMMING PLAYBACK SEQUENCE
1. The memory function can program ordered playback of up to 20 audio CD tracks or 99 mp3 tracks.
2. Stop the music playback by pressing the STOP button (25). To activate the programming mode press the PLAY.MODE button (28). The
upper right corner of the display will show 'PROG'. Select the track which you want to add to the playback list by using the UP/F.F button
(27) and DN/F.R button (26). To add it to the list, press the PLAY.MODE button (28). The track will be stored and 'Pxx' will appear on the
display (where xx is the stored track number), select the next track.
3. To begin playback of the programmed list, press the Play/Pause button (24). Playback will continue from the first to the last track.
4. You can use the track repeat mode. Press the PLAY.MODE button (28) twice to activate the repeat all mode. After playback of the last
track on the programmed list is complete, the player will begin playback from the first track on the programmed list.
5. To disable the playback of programmed tracks, press the function buttons – AM (17), FM (18) or AUX (20), or open the player drawer by
using the OP/CL button (29). CAUTION: Programming playback is only possible when no music is being played. Switching between the
track repeat and random modes is possible only during track playback.
PLAYBACK OF MP3 FILES FROM USB MEMORY
Playback of mp3 files from USB memory is similar to playback of CDs. The function button described above are identical.
Starting playback mode from USB memory:
Turn the player on using the on button (5). Press the CD/USB function button (19). The track number display (10) will turn on. The disc
play/USB mode will be activated. Change the mode using the FUNCTION button (7) to USB memory (the USB symbol will appear on the
display). Insert a mass memory device into the USB port (4).
USING THE REMOTE CONTROL
The remote control buttons correspond to the function buttons on the device.
The '+10' button (33) and '-10' button (32) skip playback by 10 tracks.
USING A DEVICE CONNECTED THROUGH THE AUX IN UNIVERSAL ENTRY PORT:
1. Connect the device to the player via the AUX IN port (38).
2. Switch the player to the AUX IN mode by pressing the AUX button (20).
PLAYBACK OF VINYL DISCS
Before the first use of a turntable mount the tube as shown in Figure A, and remove the cap from the needle (50).
1. Turn on the turntable using button (5).
2. Place the disc on the turntable (41). If necessary, use adapter.
3. Select the speed p(playback speed depends on the type of disc) using the switch (44).
4. Raise the arm of the record player needle. Gently move the arm above the desired track. Press the function key PHONO (21). Lower the
arm.
5. Turn the knob to adjust the volume (8).
6. To stop playback, press PHONO (21) and lift the needle arm.
RECORDING ONTO A USB DISC
1. Recording from the radio – place the USB disc in the USB port (4). Press the AM button (17) or FM button (18) depending on the desired
6