Video Receiver Module
Available Frequencies
BAND
CH1
F Fat Shark
5740
R RaceBand
5658
E Band E
5705
A Band A
5865
Antenna Selection
The included linear antenna is an excellent selection for aircraft with a linear antenna,
such as the Inductrix
®
antenna, we recommend changing the antenna on your headset to a SPMVX5802
(right hand), or SPMVX5812 (left hand). For a premium antenna option, consider the
SPMVX5851 (right hand) or SPMVX5861 (left hand). Always use the same rotation
direction (both right or both left hand) on the video transmitter and receiver when using
CP antennas.
Antennas with a standard SMA connector are required. Antennas with an RP-SMA
connector are not compatible without an adaptor, which is not recommended due to
associated RF losses.
Alternative Video Receiver Modules
The included video receiver is modular and may be
replaced with other modules. Fat Shark offers several
video receiver modules to suit your needs, and after-
market modules are also available. Operation is only
recommended for genuine Fat Shark receiver modules.
Module Replacement
1. Remove the antenna.
2. Pry off the video receiver module door.
3. Gently grasp the video receiver module and pull
straight out to remove.
4. Insert the replacement module, being sure to align the pins.
5. Press the door back into location until it snaps into place.
6. Use an appropriate antenna for your selected video frequency.
Some aftermarket module systems require the user to open the headset for installation.
Separating the top and bottom halves of the headset to install a wire harness for a
receiver installation will void the headset warranty.
All manuals and user guides at all-guides.com
CH2
CH3
5760
5780
5695
5732
5685
5665
5845
5825
FPV quadcopter. If your aircraft has a circularly polarized (CP)
9
CH4
CH5
CH6
5800
5820
5840
5769
5806
5843
5645
5885
5905
5805
5785
5765
CH7
CH8
5860
5880
5880
5917
5925
5945
5745
5725