Rothenberger Industrial 1500000194 Mode D'emploi page 7

- Do not remove the cartridge until it is completely
empty. To remove it, open the gas regulator valve
slightly, check that no gas escapes and shake the
appliance to ensure that the cartridge contains no
liquid.
- Gas cartridges may only be changed or connected
in a well ventilated location, preferably outdoors
and away from all possible sources of ignition such
as open flames, pilot lights, electric cooking
appliances and away from other persons.
- Discard used cartridges at a recycling facility.
TECHNICAL SPECIFICATIONS
Gas type:
Flame temperature:
Gas consumption during normal use:
Nozzle diameter:
Gas cartridge:
FEATURES
1. Gas regulator (+ large flame, - small flame)
2. Nozzle
3. Cartridge holder
4. Valve with pin and rubber seal
5. Air flow regulator
SCOPE OF USE
This bunsen burner is designed for heating or melting appropriate substances. The device must only
be used for applications within its intended scope of use. Use of the product for any other purpose and
/ or modification of the product counts as misuse and can be highly dangerous.
What to do in case of leaks
- Stop using the appliance and turn it off
immediately and take it outside into the open air.
Do not leave the device unsupervised until all the
gas has escaped. Contact a service agaent or
discard at an appropriate facility.
Direct pressure butane
900 °C
45 g/h / 1.0 kW
0.15 mm
This appliance may only be used with the
ROTHENBERGER butane disposable cartridge 'C 200'
or equivalents. It may be hazardous to attempt to fit
other types of gas containers.
4
7
2
5
3
1