Standby Mode; Faqs - EcoFlow EFM100-HUB-HV Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Standby Mode

When DC OUT and AC OUT have no continuous output for 20 seconds, the Power Hub will
enter Standby Mode automatically to reduce power consumption and save battery energy.
Press the DC OUT or AC OUT button to wake up the system.
The Power Hub will not enter Standby Mode during firmware update.

FAQs

1. Can I connect non-ECOFLOW photovoltaic panels?
Yes, the Power hub has three independent PV charging inputs, and users are free to
choose any brand and model of PV panel.
2. Which scenarios does this product apply to?
Application scenarios include but are not limited to Homes, RVs, and Off-grid Builds.
3. Do the input and output parameters of this product apply to electricity use
standards of all countries?
Yes. Both low-voltage and high-voltage versions of this product are available, which
cover electricity use standards of all countries.
4. What are the charging and discharging methods of this product?
Charging methods include: AC Charging, Vehicle Alternator Charging, Smart Generator
Charging and Solar Charging. The discharging method is AC/DC output.
5. Which devices can connect to the AC output port of this product?
The rated power of the AC output port of this product is 3600W, and surge power is
7200W. It can supply power to most home appliances. However, it is recommended to
confirm the power of the appliances before use, and ensure that the total power of all
AC loads is less than the rated power.
6. How can I clean this product?
Use a dry, soft, and clean cloth or paper towel to wipe off dust, dirt, or water on this
product.
7. How do I store this product?
Before storage, power off the product, then store it in a dry and well-ventilated indoor
environment. Do not place this product near water sources.
EN
13

Publicité

Chapitres

Table des Matières
loading

Table des Matières