English; Optional Frontal Pellet Feeding Kit - Extraflame COMFORT IDRO L80 Manuel D'instruction

OPTIONAL FRONTAL PELLET FEEDING KIT

The optional frontal pellet feeding kit allows feeding pellets inside the tank without
having to remove the insert (which requires the shutdown of the machine).
Before proceeding with the installation you must ensure that the structure that will cover the insert ensures a hole with the
minimum dimensions shown in the figure below.
The images shows the minimum sizes to be observed between the insert and the cover: these sizes are necessary to enable the
correct movement of the frame and the removal of the same from its original place.
You can also assemble it with the insert fitted.
COMFORT IDRO L80
700 X 841 MM WITH OPTIONAL TRAY
L= 841
WARNING:
ALWAYS FOLLOW THE INSTRUCTIONS IN COMPLETE SAFETY!
THE STOVE MUST BE COMPLETELY COLD, SWITCHED OFF
AND DISCONNECTED FROM THE ELECTRICAL OUTLET.
FOR THE CORRECT OPERATION OF THE INSERT, THE TRAY MUST ALWAYS REMAIN
CLOSED EXCEPT FOR WHEN THE TANK IS BEING LOADED.
WE RECOMMEND NOT LOADING AN AMOUNT OF PELLETS GREATER THAN THE CAPACITY
OF THE TANK, AND AVOID DROPPING PELLETS INSIDE THE PRODUCT

ENGLISH

15