Honda HHB25 Manuel De L'utilisateur page 36

How to use the nozzle
This handy blower is designed to be applicable to various cleaning
work by using the fan nozzle or round nozzle (optional part).
• The fan nozzle produces wide and strong airflow. You can control
application of this airflow to the working area very precisely.
This fan nozzle is excellent to blow the flat surface for collection of
sawdust, leaves, cut grass, etc. thoroughly.
• The round nozzle (optional part) is excellent for collection on uneven
surfaces (e.g. field, lawn yard, etc.)
For efficient use of the handy blower:
To minimize the blowing time, collect the debris, etc. with a rake or
broom before blowing, if they are scattered in wide area.
If the debris, etc. are stack hard, loosen them with a rake or broom
before blowing.
To minimize the debris that came to the surface and contamination:
• When the debris, etc. that you are to collect are very dusty, remove
the dust a little from the surface, or dampen surfaces.
• Expand the blower nozzle enough to apply the airflow as close to
the ground surface as possible.
• Blow the debris, etc. with care not to let the blown debris hit on the
people, children, pets, open windows and the just cleaned cars.
• Clean the working area after blowing.
To minimize the noise:
• Operate the handy blower only in the daytime of weekday. Avoid
operation at the time when the people are sleeping or resting (e.g.
early in the morning, late at night, or at noon recess). Observe the
local regulations and work at an adequate time. Normally, we
recommend that you operate the handy blower in the daytime of
weekday when the people are working, too. Operation on weekend
and holiday is not recommended so you do not bother the
neighboring.
• Use one handy blower at a time if possible.
• Operate the handy blower at the slower throttle speed as much as
possible.
• Check the handy blower, especially the muffler, intake air port and
the air filter before operation.
33