Pre-Operation Checks; Check The Fuel Level - Honda HHB25 Manuel De L'utilisateur

For safe and efficient blowing, always make a pre-operation
inspection before operating.
Perform a pre-operation inspection on firm, level surface with the
engine stopped and spark plug cap removed from the spark plug.
Before each use, look around and underneath the engine for signs of
oil or gasoline leaks.

Check the fuel level

Use automotive unleaded gasoline with a Research Octane Number of
91 or higher (a Pump Octane Number of 86 or higher).
Never use gasoline that is stale, contaminated, or mixed with oil.
Avoid getting dirt or water in the fuel tank.
• Gasoline is extremely flammable and is explosive under certain
conditions.
• Refuel in a well-ventilated area with the engine stopped. Do not
smoke or allow flames or sparks in the area where the engine is
refueled or where gasoline is stored.
• Do not overfill the fuel tank (there should be no fuel in the filler
neck). After refueling, make sure the tank cap is closed properly and
securely.
• Be careful not to spill fuel when refueling. Spilled fuel or fuel vapor
may ignite. If any fuel is spilled, make sure the area is dry before
starting the engine.
• Avoid repeated or prolonged contact with skin or breathing of
vapor. KEEP OUT OF REACH OF CHILDREN.

5. PRE-OPERATION CHECKS

19