Publicité
Les langues disponibles
Les langues disponibles
INSTASTART™
Electronic Ignition
■ Turn fuel valve on. Push the red igniter button
and a spark should jump between the electrode
and lower mantle support and ignite the mantle.
NOTE: If lantern does not light after pushing the
igniter button a few times, repeat above step after
turning fuel valve completely off. If the lantern is
wet due to rain, high humidity, etc., the valve may
not spark. Use match lighting procedure
as follows.
Match Lighting
■ Push lighted match through lighting hole, hold
near mantle and open fuel valve fully.
WARNING
• BURN HAZARD
• Never leave lantern unattended when hot
or in use.
• Keep out of reach of children.
■ Brightness may be adjusted with fuel valve.
■ The lantern may be carried by the handle.
To Turn Off
■ Turn fuel valve off.
To Store
■ Make sure lan-
tern is cool.
■ Move lantern
away from flame
(including pilot
lights) and other
ignition sources.
■ Remove propane
cylinder from
lantern.
■ Replace
protective cap on
propane cylinder.
■ Invert base and
place on collar
for storage.
English-5
Publicité
