Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
ASSEMBLING/DISASSEMBLING OF THE APPLIANCE
First of all, disconnect the plug from the socket!
To disassemble the appliance, Fig. 1, turn CW the
blender stem (2), aligning (5) the open padlock symbol
[
] with the reference [
stem (2) and pull the stem (2) out.
To assemble, insert the blender stem (2) in the seat of
the motor body (1), Fig. 1, keeping the symbol of the
open lock [
] aligned (5) with the reference [
on the blender stem (2). Then turn the stem (2) CCW ,
Fig. 2, until it is completely locked; the closed padlock
symbol [
] shall coincide (5) with the reference
[
].
INSTRUCTIONS FOR USE
Before using the appliance, disassemble and wash the blending shaft with the blade (2).
Use normal dishwashing detergent since it comes into contact with food during use (refer
to the section on "cleaning").
INITIAL START-UP
• Completely unwind the power cord (5) and connect the plug to a power outlet.
• Introduce the food cut into pieces inside the measuring glass (7) or another recipient.
• Introduce the blending shaft (2) into the container and press one of the two ON buttons
• Release the ON button to stop the appliance.
•
the container.
Attention!
• During use, always keep the power cord away from the blades.
• Do not leave the appliance unattended with the plug connected to the power outlet
• Never touch moving parts, especially the blades.
• Keep the appliance out of reach of children.
• Do not immerse the appliance in liquids for more than 2/3 of the length of the blending shaft.
• Do not operate the appliance on empty
• Do not use the appliance to blend food that is too hard such as coffee, ice, chocolate, etc.
• Do not let the mixer operate for more than 50 seconds consecutively. Wait 3 minutes
between each use to allow the motor to cool.
] shown on the blender
]
Publicité
