Lega 4290 Manuel D'utilisation page 6

2.1 OPERATING INSTRUCTIONS 2.1 2.1 2.1 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
Power on blade movement via the button (2).
Select the blade temperature via the thermostat selector (3). The thermostat can work at temperatures ranging
between 40°C and 120°C.
A temperature of around 100°C, however, is usually recommended.
CAUTION! CAUTION!
CAUTION! CAUTION! The vibrating blade is hot and sharp: avoid injuries by never placing your hands in dangerous The vibrating blade is hot and sharp: avoid injuries by never placing your han
The vibrating blade is hot and sharp: avoid injuries by never placing your han The vibrating blade is hot and sharp: avoid injuries by never placing your han
positions during work. positions during work.
positions during work. positions during work.
Cause the hive to uncap to slide on the frame holder guides from top to bottom, ensuring that one side goes
over the blade first, followed by the other side. Cut-off cappings will thus fall onto the bench drip.
2.2 MAINTENANCE 2.2 2.2 2.2 MAINTENANCE MAINTENANCE MAINTENANCE
MAINTENANCE OPERATIONS SHOULD BE CARRIED
OUT AFTER STOPPING THE MACHINE AND
DISCONNECTING ELECTRIC POWER.
At work end, the machine should be rinsed with
warm water only and wiped dry with a cotton cloth.
After the last uncapping cycle at season end, check
the uncapping machine efficiency and carry out any
required maintenance to ensure that the machine is in
the best working order, ready for the following year.
Make sure that the machine internal motor never
enters into contact with water.
2.3 FAULTS, CAUSES AND REMEDIES 2.3 FAULTS, CAUSES AND REMEDIES
2.3 2.3 FAULTS, CAUSES AND REMEDIES FAULTS, CAUSES AND REMEDIES
THE BLADE WON'T HEAT UP
- Check if the machine is correctly plugged into the power line.
- Check that the fuses are efficient (4)
- Have the system checked by an electrician.
THE BLADE WON'T VIBRATE
- Check the machine internal cam bearing.
- Check the connecting screw between the cam and motor.
- Check that the elastic bands are intact.
- Have the system checked by an electrician.
LEGA LEGA
LEGA LEGA
srl srl srl srl
C C C C ostruzioni ostruzioni A A A A pistich ostruzioni ostruzioni
www.legaitaly.com - - - - Tel 054626834 www.legaitaly.com www.legaitaly.com www.legaitaly.com
pistiche e e e – – – – via Maestri del Lavoro 23 pistich pistich via Maestri del Lavoro 23 – – – – 48018 Faenza via Maestri del Lavoro 23 via Maestri del Lavoro 23
Tel 054626834 – – – – Fax 054628279 Tel 054626834 Tel 054626834 Fax 054628279 – – – – P.iva 00043230390 Fax 054628279 Fax 054628279
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
P.iva 00043230390 P.iva 00043230390 P.iva 00043230390
ds in dangerous
ds in dangerous ds in dangerous
48018 Faenza 48018 Faenza 48018 Faenza
6 / 16