HASWING 8000 Mode D'emploi page 15

How to install the charger
The charger can be installed in 3 different positions.
As a stationary device
How do I charge a battery
Connect the clips (red to + and black to -) to the battery first to let the Battery
tester determine the charging state of the battery and display it to you. For re-
liable reading, the battery should be at room temperature (20 ºC), and it must
have been resting for at least 4 hours (no charging has taken place either in
the vehicle or using the HASWING Intelligent battery care charger). If charg-
ing has taken place within the last 4 hours, a higher reading will be the result.
Testing of the battery will always take place before charging, enabling the
HASWING Intelligent battery care system to give the optimum charging.
Red clips to +
Black clips to -
As a handheld device
15
HASWING
As a device on the wall
Battery tester