PROPAIN HUGENE CF 29 Instructions De Montage page 9

// INFLATING THE TIRE
1
1. Release the air from the tire completely.
2. Unscrew the valve cap.
3. Unscrew the valve insert from the valve using the valve
key supplied.
2
1.
2.
per tire.
3. Screw the valve insert into the valve using the valve key
and tighten it by hand.
3
1.
2.
The tire must contact the rim evenly around its
the tire into the center of the rim bed and repeat
the procedure.
Have the tire seat checked by a professional if in
any doubt.
3. Slowly rotate and shake the wheel to distribute the
4.
your own requirements.
5. Screw on the valve cap.
6. Carry out a short test ride and check the tire pressure
regularly.