Olimpia splendid CALDO UP T Instructions Pour L'installation, L'emploi Et L'entretien page 45

8.2 - Remote control functions buttons
A remote control to ease the settings and the functions of the
appliance is supplied.
At each pressure of a button of the remote control, the appli-
ance emits a "beep" to report the signal reception.
In order to use the appliance it is necessary to press the switch on
the right side of the appliance on "I" (ON) (position 6 - figure X).
ON/OFF button
Press this button to switch the appliance on; the FAN LED turns on, the ap-
pliance starts in FAN mode and the flap opens.
Press it again to switch the appliance off.
Operation mode selection button
Press this button to select the desired functioning mode
FAN (FAN) > Minimum power (LOW) > Maximum power (HIGH)
Flap button (SWING)
Press this button to adjust air direction.
Switching off delay button
Press this button to confirm/cancel the appliance switching off delay.
ECO mode button (temperature setting)
Press this button to set the desired temperature. After pressing the button, set
temperature with buttons
OK button
Press this button to confirm the settings.
Weekly functioning setting button
Weekly setting cancellation button
Open window/door function activation/deactivation button
Setting values increase/decrease buttons
and (range: 18°C÷45°C).
24/7
EN - 17
CALDO UP T