Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Gas burners
There are indications to show which burner
each control knob operates.
It is essential to ensure that all the burner
parts and pan supports are correctly
installed for the appliance to work correctly.
Switching on manually
Press the chosen burner control knob
1.
and turn it anticlockwise to the required
setting.
Use any type of lighter or flame (cigarette
2.
lighter, matches, etc.) and bring it close
to the burner.
Switching on automatically
If your hob can be switched on
automatically (ignition sparkers):
Press the chosen burner control knob
1.
and turn it anticlockwise to the maximum
power setting.
While the control knob is still pressed
down, sparks are produced on all
burners. The flame ignites.
Release the control knob.
2.
Turn the control knob to the required
3.
setting.
If it does not come on, turn the control
knob to the off setting and repeat the steps
above. This time, press and hold the
control knob for longer (up to 10 seconds).
All manuals and user guides at all-guides.com
m
Risk of deflagration!
If after 15 seconds the flame does not
ignite, switch off the burner and open a
nearby window or door. Wait at least one
minute before trying to switch the burner
back on.
Safety system
Depending on the model, your hob may
have a safety system (thermocouple) that
prevents the flow of gas if the burners
accidentally switch off.
,JQLWLRQ
7KHUPRFRXSOH
VSDUNHU
To ensure that this device is active:
Switch on the burner as usual.
1.
Without releasing the control knob, press
2.
and hold it down firmly for 4 seconds
after lighting the flame.
Switching off a burner
Turn the corresponding control knob
clockwise to the 0 setting.
Power levels
The progressive control knobs can be used
to control the power needed, from
minimum to maximum power.
Setting
Control knob off
Û
High flame
Maximum capacity or aperture
ƒ
and electricity on
Low flame
Minimum capacity or aperture
„
7
Publicité
Chapitres
Table des Matières
