Publicité
Les langues disponibles
Les langues disponibles
8. Do not use the pump when the pool is in use.
9. Cover the pool when not in use (Cover not included).
ATTENTION:
ATTENTION:
maintenance work on the PVC liner when the temperature is lower than
5°C (41°F).
WINTERIZATION
If you do not want to dismantle the pool in winter, please observe the following instructions:
IMPORTANT:
so, the pool may be damaged by strong wind. Drain the water to 10cm
below the inlet valve on the pool wall.
1. Drain the water to 10cm below the inlet valve on the pool wall. You can
use a pump or a garden hose (Diagram 19, 20).
2. Treat the pool water with a suitable chemical product.
3. Remove the filtration system from the pool. You can leave the
inlets/outlets attached to the pool.
4. Also remove any other pool accessories and store them in a dry and
cool place.
5. Protect the pool with the pool cover.
If you want to dismantle the pool in winter, please observe the following
instructions:
1. Drain the pool with a garden hose, or use a drain pump to empty the pool
(Diagram 19).
2. Clean every pool parts with a sponge and a soap with a neutral pH. Dry
them and tidy them away in a dry and clean place.
19
20
4in. (10cm)
Do not leave the drained pool outside.
lease do not clean or perform any
P
Do not drain all of the pool water. If you do
RE- ASSEMBLY
Carefully inspect your pool to ensure that there are no missing or
damaged parts.
1. Follow steps 1 through 8 for assembling the rail and steel wall.
2. Align the holes on both the steel wall and the liner.
3. Assemble the control valve and strainer.
#04
#08
4. Follow steps 9 through 13 and fill the pool with water.
NOTE:
If you discover the liner is damaged, please contact our
After Sales Service or purchase a new liner.
9
S-S-004987
Publicité
