Publicité
Les langues disponibles
Les langues disponibles
Emptying Containers
To empty the main container, simply take it by the handle and lift it upwards, withdrawing it from lateral guides (Picture 6 pos. 1).
N.B.: Before removing the main container, in some models it is necessary to release it by lifting the lever (Picture 6 pos. 2) and rotating it at
90°. After this operation, bring the lever back to its initial operating position.
To empty the back container, release the lock (Picture 7 pos. 1) and withdraw it at the back. Avoid turning the opening downwards
(Picture 8 pos.1). Then, reassembly the containers in the proper position.
Handling After Usage and Storage
To avoid damaging lateral brush bristles, lift the brush from the ground after every usage of
the sweeper (Picture 9 pos. 1). In this way, during rest intervals, bristles are not constantly
under pressure and do not loose effi ciency in cleaning when used. If it is necessary to put
the sweeper in limited spaces, simply unscrew wheels and bend the handle forward to a
horizontal position (Picture 9 pos. 2). Retighten wheels and store the product.
Servicing
This manual sweeper does not require servicing. Dry clean only. Do not wash the machine with water or solvents.
Replacement of Brushes
CENTRAL BRUSH
- Completely remove dirt containers.
- Lay the sweeper on its side so as to reach the central brush with ease.
- Lay the sweeper on its side so as to reach the central brush with ease.
- Unscrew the 4 fastening screws (Picture 10 pos. 1).
- Withdraw the central brush as described in Picture 11.
- Assembly the new brush following the abovementioned stages backwards.
- Assembly the new brush following the abovementioned stages backwards.
LATERAL BRUSH
- Lift the brush support arm to a vertical position.
- Unscrew fastening screws (Picture 12 pos. 1) and remove the worn brush.
- Reassembly the new brush following the abovem mentioned stages backwards.
N.B.: After installing new brushes, check their height. If necessary, adjust them.
5
Publicité
